Masquer les pouces Voir aussi pour Sonic 2000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Operation
Important notice
If the batteries are insufficiently charged, the LED light starts flashing red. In this case connect the device to a USB port
(computer, laptop, mobile phone charger, etc.) using the provided cable. Once the batteries are fully charged, the red LED
will glow continuously.
To maximise the battery capacity, we recommend for the first 3 times to wait until the batteries are completely discharged,
before charging them again. This way the memory effect is avoided. The battery memory effect is a reduction in the longevity
of a rechargeable battery's charge, due to incomplete discharge in previous uses. Some types of batteries, such as nickel-
cadmium and nickel-metal hydride, can develop a memory effect when only partially discharged before recharging.
Due to the different transport, storage and shipping times until the first use, it may be necessary to charge the batteries. This
is not unusual. When the device is switched on. the red LED light in the upper half of the flash window lights up for approx.
5 seconds.
After a further 25 seconds the unit is ready for operation. Now the motion detector can be triggered. After a short, audible
start click, the device emits ultrasonic sounds for approx. 9 seconds. As a visible function monitoring, the light behind the
motion detector also lights up red. The VOSS.sonic 2000 starts working as soon as the motion detector is triggered. The
device is now ready for operation.
Frequencies
You have the choice of 5 different ultrasonic frequencies. Level 5 emits a frequency mix from all levels.
Settings
The „Sens." dial (left) controls the setting of sensitivity and distance. By turning the dial clockwise you increase the range and
coverage.
To frighten small animals, turn the „Sens." dial all the way to the right.
The „Freq." dial (right) controls the frequency. By turning the dial clockwise, you increase/change the emitted frequency.
0 : OFF
1 : Scares animals like dogs, cats, raccoons, ...
2 : Scares animals like foxes, wild boars, deer, ...
3 : Scares little rodents, rats, martens, badgers, otters, rabbits, hares ...
4 : Flash adds to the deterrent effect, especially frightens birds
5 : Functions 1-4 are activated (switching between frequency modes 1, 2 and 3) together with the flash.
This is the best setting as all functions of the unit are used.

Important

To change a setting, you must always start from the OFF position (0) and then select the desired setting. For example, if you
change directly from setting 3 to 1 without having turned the dial to the OFF position (0), the device will still be in the setting
3.
Important tip
The flash increases the deterrent effect, especially in the darkness. If you plan to use the flash for longer intervals, we
recommend charging the device regularly via the USB charging cable.
Caution
Make sure to turn off the flash on the unit if a person with epilepsy is in the operating area. Remember to switch off the unit
when you are in the operating area for a prolonged period of time.
Caution
For people with sensitive hearing, certain ultrasound frequencies can lead to health problems such as headaches. This must
be taken into account when installing the device.
Explanation of the product labels
Symbol
Meaning
Disposal of electrical goods
Compliance of the product with the EU directives
12
All manuals and user guides at all-guides.com
INSTRUCTION MANUAL VOSS.SONIC 2000
45022| 10 | 2020 | V 2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

4502245022.2

Table des Matières