Troubleshooting - Scheppach CIL270-20ProS Traduction Des Instructions D'origine

15. Troubleshooting

The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault Possible cause
Battery empty
Device does not start Battery defective
On/off switch defective
Battery depleted
Reduced power
Battery not fully charged
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Remedy
Charge battery
Check the battery, have it repaired by a certified electrician
if necessary
Repair by an authorised service centre
Replace battery
Charge battery