Residual Risks; Technical Data; Unpacking; Installation - Scheppach CIL270-20ProS Traduction Des Instructions D'origine

7. Residual risks

The machine has been built according to the state of
the art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „safety in-
structions" and the „Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this manual. This ensures that your machine per-
forms optimally.
• Hands may never enter the processing zone when
the machine is in operation.

8. Technical data

Rated voltage
Power consumption
Luminous intensity
Weight
Subject to technical changes!

9. Unpacking

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage. Inform the transport agent immediately of
any faults. Later complaints cannot be considered.
• If possible, store the packaging until the warranty
period has expired.
• Familiarize yourself with the machine with the help
of the operating instructions manual before using it.
• Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your scheppach retailer.
• Please quote our article numbers as well as type
and production year in all your orders.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
18 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

10. Installation

The device is delivered without accessories, battery
and fast charger.
To ensure that the Li battery pack provides long ser-
vice you should take care to recharge it promptly. You
must recharge the battery pack when you notice that
the power of the cordless equipment drops.
The device is equipped with a bright LED lamp. The
LED illuminates to a brightness of 110 lux (300 lm).
The light head can be rotated 270° and swivelled
180° for almost unlimited light positions. The rubber-
ised insert on the housing handle ensures a good
grip. The integrated hanging hook (4) makes it easy
to hang up the lamp.
Insertion / removal of a batterypack into the ap-
pliance
Ensure that the appliance is switched off before in-
serting the battery. The insertion of a battery into an
electrical appliance that is switched on can lead to
accidents.
20 V
Inserting the rechargeable battery pack:
3 watt
Move the rotation switch (2) into the middle position
300 lumen
(lock) and push the rechargeable battery pack (5) into
0.3 kg
the handle until it engages.
Removing the rechargeable battery pack:
Press the release button (4) and remove the re-
chargeable battery pack.
Used batteries
If a fully recharged battery lasts for considerably
shorter operating times, the battery is used up and
needs to be replaced. Only use an OEM battery pack
replacement available from our Customer Service.
Switching on and off
Switching on:
Press the ON/OFF switch (2) to start up the device.
This enables the working area to be illuminated in un-
favourable lighting conditions.