IMOU Cruiser Guide De Démarrage Rapide page 7

Peel off the U-shaped mounting template and stick it to the desired installation
1
area.
Drill holes into the mounting surface as the mounting template marks and then
2
insert wall anchors as needed.
Secure the mounting bracket to the surface with included mounting screws.
3
Align on the top of the camera with
4
together.
Rotate the camera counterclockwise until it is locked. Make sure
5
Power on the camera and then adjust its angle properly.
6
Wall Mount
Peel off the rectangular mounting template and stick it to the desired installation
1
area.
Drill holes into the mounting surface as the mounting template marks and then
2
insert wall anchors as needed.
Secure the mounting bracket to the surface with included mounting screws.
3
Align on the top of the camera with
4
together.
on the bracket, then fit the two parts
Mounting Surface
Mounting Bracket
Rectangular
1
Mounting Template
Wall Anchor
Mounting Screw
2
Camera
3
on the bracket, then fit the two parts
align with .