Device Status - IMOU Cruiser Guide De Démarrage Rapide

Note:
1. Press and hold the reset button for 10 s to reset the camera.
2. Double-press the reset button to enable camera's hotspot.
See the table below for definitions of camera's LED behaviors.
LED Indicator Status
off
Solid red
Flashing red
Flashing green
Solid green
Flashing green and red alternately
Speaker

Device Status

Power off/LED turned off
Rebooting after reset
Booting
Device malfunction
Network connection failed
Pairing falied
Ready for network configuration
Ready to pair
Operating properly
Updating firmware