Operating The Night-Light; Talk Back Feature; Temperature Alert; Temperature Alert - weewell WMA400 Mode D'emploi

Operating the Night-light

You can operate the night-light through the parent unit menu or by pressing
the button on the baby unit.
1. Select 'Light' in the menu with the + and – buttons.
2. Press the OK button to confirm.
3. Press the + or – buttons to select on or off.
4. Press the OK button to confirm.
5. You can also operate the night-light by pressing the

Talk back Feature

You can use the TALK button on the parent unit to talk to and comfort your
baby.
1. Press and hold the TALK button and talk clearly into the microphone from a
distance of approximately 15-30 cm. The green LINK light will start flashing and
the message 'Talk' appears on the display.
2. Release the TALK button when you have finished talking.

Temperature Alert

If the temperature alert is switched on, the parent unit beeps if the actual
room temperature exceeds the set maximum temperature or drops below the
set minimum temperature. In addition, the backlight of the parent unit display
goes on, the temperature alert symbol flashes and 'High' or 'Low' appears on
the display. If no minimum and maximum temperatures have been set, the
temperature alert is given when the room temperature drops below 18
rises above 21 C as default.
o
1. Select 'Temperature' in the menu with the + and – buttons.
2. Press the OK button to confirm.
3. Select 'Alert' with the + and – buttons.
4. Press the OK button to confirm.
5. If the alert is off, the display shows 'Alert On?' Press the OK button to switch on
the alert.
If the alert is on, the display shows 'Alert Off?' Press the OK button to switch off
the alert.
16 I
WMA400 USER MANUAL
button on the baby unit.
C or
o