Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.3 Parent unit lights
3 green lights and 2 red lights indicating the sound level detected by the baby unit.
Green lights indicate a moderate level of sound is detected.Red lights indicate a
higher level of sound is detected.
More lights turn on when the sound level detected increases.
Off when the pa ent unit is off.
On in green steadily when the parent unit is on and is linked to the baby unit.
Flashes in green when there is no link between the baby unit and parent unit.
On in red steadily when the parent unit is charging.
Flashes in red when the battery is low.
3.4 Positioning and operating range
3.4.1 Position the audio monitor
Place the parent unit within the operating range of the baby unit. We recommend
the parent unit is at least 1.5 metres away from the baby unit to avoid audio
feedback. If you still experience audio feedback, move the parent unit and the baby
unit farther apart.
NOTES
•If the signal is poor, try moving the parent and/or the baby unit to different positions
in the rooms.
•It is the caregiver's responsibility to stay close enough to take care of any eventuality.
3.4.2 Test your audio monitor before use
It is important to test the audio monitor when it is installed initially, and at regular
times thereafter. Test your parent unit and baby units if they have not been used for a
3 green lights and 2 red lights indicating the sound level detected
by the baby unit.
Green lights indicate a moderate level of sound is detected. Red
lights indicate a higher level of sound is detected.
More lights turn on when the sound level detected increases.
Off when the pa ent unit is off.
On in green steadily when the parent unit is on and is linked to
the baby unit. Flashes in green when there is no link between the
baby unit and parent unit.
On in red steadily when the parent unit is charging.
Flashes in red when the battery is low.
WMA370 USER MANUAL
I
9
Publicité
Chapitres
Table des Matières
