Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

IMPORTANT INSTRUCTIONS -
Models: B300, B500, B600
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN
THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock and injury to
WARNING:
THIS BLOWER ASSEMBLY MUST BE
INSTALLED WITH TRANSFORMER ASSEMBLY MODEL XFMR129:
WARNING:
OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer.If you
have questions, contact the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service panel
and lock the service disconnecting means to prevent power from
being switched on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as
a tag, to the service panel.
WARNING:
OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-related construction.
672016 Rev. H 12-18
OPERATING MANUAL
AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
person, including the following:
TO REDUCE THE RISK
TO REDUCE THE RISK
SAVE THESE INSTRUCTIONS
b) Sufficient air is needed for proper combustion and exhausting of
gases through the flue (chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment manufacturer's guideline
and safety standards such as those published by the National Fire
Protection Association (NFPA) and the American Society for Heating,
Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
c) To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power unit.
d) Read all instructions before installing or using range hood.
e) Refer to the instructions included with the Range Hood Canopy for
additional safety information.
www.airkinglimited.com
Profesional Series
CAUTION:
FOR GENERAL VENTILATING USE
ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS AND VAPORS.
Blower
1 of 8

Publicité

Table des Matières
loading

Sommaire des Matières pour AirKing Profesional Serie

  • Page 1 IMPORTANT INSTRUCTIONS - OPERATING MANUAL Profesional Series Models: B300, B500, B600 Blower READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Installation Instructions

    INSTALLATION INSTRUCTIONS Stud w/Hex Nuts CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION. Screw Stud WARNING: THIS BLOWER IS INTENDED FOR USE ONLY IN AIR KING PROFESSIONAL SERIES RANGEHOOD CANOPIES MARKED SUITABLE FOR USE WITH THIS BLOWER. DO NOT INSTALL IN ANY OTHER APPLICATION.
  • Page 3: Bottom Plate

    5. Plug both the 3 wire and 4 wire quick connect cords from the blower into the appropriate receptacles located on the inside front of the hood canopy. These cords will only fit into the receptacles one way (Figure 3). 6.
  • Page 4: Replacement Parts Diagram

    REPLACEMENT PARTS DIAGRAM Qty. Description Replacement Part # Fuse 5S1136106 Capacitor Box 5S1136114 Wire Harness (B300) 5S1136403 Wire Harness (B500) 5S1136402 Wire Harness (B600) 5S1136401 www.airkinglimited.com 672016 Rev. H 12-18 4 of 8...
  • Page 5: Ventilateur De La Série Professionnelle

    INSTRUCTIONS IMPORTANTES – MODE D’EMPLOI Ventilateur de la série Modèles: B300, B500, B600 Professionnelle LIRE ET CONSERVER CES INSTRUCTIONS LIRE SOIGNEUSEMENT AVANT DE TENTER D’ASSEMBLER, INSTALLER, OPÉRER OU DE RÉPARER LE PRODUIT DÉCRIT. PROTÉGEZ VOUS-MÊME ET LES AUTRES EN OBSERVANT TOUTE L’INFORMATION DE SÉCURITÉ.
  • Page 6: Préparation De L'installation

    INSTRUCTIONS D’INSTALLATION Montants avec écrous hexagonaux AVERTISSEMENT : VOUS ASSURER QUE L’ALIMENTATION EST COUPÉE AU PANNEAU DE SERVICE Montant AVANT DE COMMENCER L’INSTALLATION. de vis AVERTISSEMENT : CETTE SOUFFLANTE EST CON- CUE UNIQUEMENT POUR UTILISATION AVEC LES COUVERCLES DE HOTTE DE CUISINIERE DES SERIES PROFESSIONNELLES DE AIR KING Trou en MARQUEES APPLICABLES POUR UTILISATION AVEC CETTE SOUFFLANTE.
  • Page 7: Terminer L'installation

    4. En utilisant 8 des vis #8-32 incluses, les rondelles plates et en étoile, montez le ventilateur en place et serrez toutes les vis. Confirmez que le ventilateur est solidement en place et qu’il n’y a aucun entrefer autour du joint du ventilateur. Capuchon 5.
  • Page 8: Diagramme Des Pièces De Remplacement

    DIAGRAMME DES PIÈCES DE REMPLACEMENT # de pièce Qté. Description de remplacement Fusible 5S1136106 Boîte de condensateur 5S1136114 Harnais de câbles (B300) 5S1136403 Harnais de câbles (B500) 5S1136402 Harnais de câbles (B600) 5S1136401 www.airkinglimited.com 672016 Rev. H 12-18 8 of 8...

Ce manuel est également adapté pour:

B300B500B600

Table des Matières