Technical Data; Unpacking; Assembly; Commissioning - GardenMeister GM-LS-360 Traduction Des Instructions D'origine

Persons who operate and maintain the machine must
be familiar with it and must be informed about potential
dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the ma-
chine.
The machine may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our products were not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the product is used in
commercial or industrial applications, or for equivalent
work.
m Warning: Sweeping of any gel, liquid, combustible,
explosive, hot and harmful substances prohibited.

5. Technical data

Dimensions L x W x H
Drive
Max. sweeping width with
side brushes
Approximate sweeping
capacity
Collection bag volume
Weight

6. Unpacking

• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
• With accessories as well as wearing parts and re-
• When ordering please provide our article number as
m Attention!
The product and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!

7. Assembly

Your machine is not completely assembled for pack-
aging reasons.
Remove all accessory parts from the collection bag
and check these for completeness. (fig. 3.1, 3.2)
Fitting the collecting bag (fig. 4)
1.
2.
930 x 660 x 840
mm
3.
manual
530 mm
4.
1500 m²/h
100 l
5.
6 kg

8. Commissioning

Using the leaf and grass collector
When the leaf and grass collector is moved, the trans-
port wheels (6) activate the sweeping brushes (7) and
they start rotating. Their comb-like shape allows the
rotating sweeping brushes (7) to enter the lawn and to
collect leaves and other light foreign objects. Thanks
to the design of the housing, the collected material is
directed into the collecting bag (5).
operating manual before using for the first time.
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
well as type and year of manufacture for the product.
Mount the collection bag wire by connecting the
upper collection bag wire (12) and the lower collec-
tion bag wire (13) using the cross member (11) and
both collection bag holders (10). Fix them with the
screws (c) and the washers (d).
Now hang the collection bag (5) into the collection
bag wire.
Secure the lower push rods (4) at the assembly
points provided. To do so, use the clamping star
grip nuts (3) and the Fillister head screws (a) on
both sides. (fig. 5)
Attach the upper push bar (2) using the Fillister
head screw (b) as shown in fig. 6.
Finally, place the collection bag wire including the
inserted collection bag onto the rods of the upper
and lower push bar. (fig. 7)
GB | 15