Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Failure to comply with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts,
Please consider:
Read the entire text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
14 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Description of the product
1.
Handle
2.
Upper push bar
3.
Star grip nuts
4.
Lower push rods
5.
Collection bag
6.
Transport wheels
7.
Sweeping brushes
8.
Height adjustment
9.
Support feet
10. Collection bag holders
11. Cross member
12. Upper collection bag wire
13. Lower collection bag wire
3. Scope of delivery (fig. 3.1, 3.2)
• Upper push bar
• Lower push rod
• Star grip nuts M6
• Collection bag
• Upper collection bag wire
• Lower collection bag wire
• Fixing screw for push bar
• Operating manual
• Enclosed accessories bag
a. Fillister head screw M6x60
b. Fillister head screw M6x40
c. Screw ST4.2x25
d. Washer
4. Proper use
The leaf and grass collector is intended to sweep and
collect leaves and grass cuttings on lawns.
The machine may only be used in the intended manner.
Any use beyond this is improper.
The user/operator, not the manufacturer, is responsible
for damages or injuries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Publicité
Chapitres
Table des Matières
