Initial Installation - Sharp AQUOS C60UD20E Guide D'installation

Initial installation

Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
Connect an antenna cable to the
antenna terminal.
* Only connect a satellite antenna
to models capable of receiving
satellite broadcasts
If necessary, insert a CA card into
the CI slot to watch scrambled
broadcasts.
Plug the AC cord into the AC
outlet.
• Place the TV close to the AC
outlet, and keep the power plug
within reach.
• Product shape varies in some
countries.
All manuals and user guides at all-guides.com
Press a on the TV.
Run the initial auto installation.
• Follow the guide on the TV screen
to set the following settings.
■
Language setting
■
Home/Store setting
■
Country setting*
■
PIN setting
■
Channel search setting
• Digital search
− Terrestrial
− Cable*
2
• Analogue search
• Satellite search*
Some models do not have this setting.
I
Refer to the operation manual stored
J
in the TV for details on the settings for
cable broadcasts.
Start searching
channels
6
Viewing the operation
manual stored in the TV
• Refer to the operation manual
(JPEG) stored in the TV for
details.
Press
1
"HOME" screen will be
displayed.
1
2 Press a/b/c/d to select
"Manual", and then press
;.
Select the folder/file you wish
3
to view.
NOTE
• To change the language of the
1
operation manual, please select the
folder of the language to which you
would like to change.
The language of the operation manual
will not change even if the OSD
language in the language settings from
the TV main menu is changed.
• If you open the operation manual during
USB-recording, a caution screen will be
displayed that confirms your consent to
stop recording.
• When the operation manual is
displayed, returning to the "HOME"
screen is not possible by pressing 6
(Return). Press
remote control to return to the "HOME"
screen.
(HOME) and the
(HOME) on the