Remote Control; Using Remote Control; Before You Start; To Start Up - Audizio TURIN WIFI RADIO Manuel D'instructions

REMOTE CONTROL

: Press to toggle between Standby and Operation (applicable only when Standby is
enabled with power connected to the radio)
: Mute
0-9: Input index number on the list / input characters for WiFi password
: Preset the current playing station to Favorite
▲ : Cursor up
◄ : Cursor left / back to previous menu
: Alarm button
: Sleep Timer
Mode: Switch between Internet radio / BT / Media Centre
: Main Menu
: Previous station on the list/previous track on BT/Media Centre
Local: Access the local station list (Local area set up in Configuration)
: Recall the favorite list
OK: Confirm button
► : Cursor right
▼: Cursor down
Vol+: Volume up
Vol-: Volume down
EQ: Equalizer
: Next station on the list/next track on BT / Media Centre
: Play/pause for BT / Media Centre Play / stop for Internet radio
Dimmer: Access the Dimmer menu to adjust the brightness of the display
Info: Quick access to Network and System information

USING REMOTE CONTROL

On the alpha-numeric keypad, press the button repeatedly to cycle through the characters assigned to each button. Refer to
the following list. To input a character, highlight it and press the [►] button to confirm and input the next character. When it
comes to the last character of the password, press [OK] to complete the entry.
Button 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:'"\|,./<>?
Button 2: 2ABCabc
Button 3: 3DEFdef
Button 4: 4GHIghi
Button 5: 5JKLjkl
Button 6: 6MNOmno
Button 7: 7PQRSpqrs
Button 8: 8TUVtuv
Button 9: 9WXYZwxyz
Button 0: 0

BEFORE YOU START

Please ensure the following is ready:
You have a broadband internet connection. A wireless broadband router is connected to the internet successfully. The radio
supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or G). You know the Wired
Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password. You need to key in the correct
code when the radio is connected to the wireless router for network connection. If you do not know the code/password,
please contact the person/technician who set up the router/network for you. The radio can work via Wireless network
connection (Wi-Fi connection) and wired connection (ethernet RJ45).

TO START UP

• Remove internet radio tuner (called Tuner hereafter) from the package box.
• Plug in the DC adapter and switch the Power on/off switch (on the rear cabinet) to ON. Press [ ] button on the
remote to turn the radio on.
Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a different rating will cause
permanent damage to the radio and may be hazardous.
• The Tuner is intended to connect with external powered speaker. It does not have amplifier and speaker driver built-
in. Please connect your stereo through the Audio output located on the rear panel of the Tuner for listening.
7