Install The Hardware - Archos CESAR MPM Guide D'installation

All manuals and user guides at all-guides.com

2. Install the Hardware

NOTE: DO NOT try to open the lid of the CESAR until the drive is
fully installed into a computer. The lid may be locked and
CANNOT be opened at this stage.
NOTE : First use require 4 hours of Batteries charging.
• Plug in the power cable into the
Power Socket at the back of your
CESAR.
• Plug
the AC/DC
anelectrical outlet.
• Verify that the green "ON" LED is turn
ON.
adpter into
•
After 4 hours of batteries charging,
connect the interface cable to the
connector at the back of the
CESAR drive.
- 6 -