Setting Timer; Care And Maintenance - Livington CM18708 Mode D'emploi

OPERATING INSTRUCTIONS:
1.
2.
3.
4.
5.

SETTING TIMER

Livington Handy Heater has a built-in-timer that will automatically turn the unit off after a set amount of time.

CARE AND MAINTENANCE

WARNING: Before beginning any maintenance, unplug your Livington Handy
Heater Deluxe and allow to cool completely. To clean, wipe the exterior with a
non-abrasive, damp cloth. Use a mild soap if needed. Dry with a soft cloth.
14
Plug the Livington Handy Heater into desired power outlet.
Press „On/Off Switch" on side of the unit to „On" position to turn on the heater.
Use the „+" button to raise temperature or „-„ button to lower the temperature
between 15 °-32 °C on „Digital Display".
Select your desired fan speed. Press „Fan Speed Button" to choose between
High(HH) or Low(LL) on „Digital Display".
After use, set the 'On-Off' Switch to 'OFF'. Let the Livington Handy Heater cool
down. Only after that, remove the connection plug from the supply. Store the
appliance cool and dry until the next time of use.
1. While the Livington Handy Heater is plugged in and turned on,
press the „Timer Button" to activate timer, as shown.
2. Repeatedly press „Timer Button" to set number of hours before
the Livington Handy Heater turns off. You can choose between
1-12 hours.
3. Once desired hours have been chosen, stop pressing „Timer
Button" to set.
4. To cancel timer, turn the Livington Handy Heater off.