Table des Matières
Publicité
To create a Smart Connect™ event
1
From your Écran d'accueil, tap
2
If you are opening Smart Connect™ for the first time, tap OK to close the
introduction screen.
3
On the Événements tab, tap
4
If you are creating an event for the first time, tap OK again to close the
introduction screen.
5
Add conditions under which you want to trigger the event. A condition could be
the connection with an accessory, or a specific time interval, or both.
6
Tap
to continue.
7
Add what you want to happen when you connect an accessory, and set other
settings as desired.
8
Tap
to continue.
9
Set an event name, then tap Fin.
To add a Bluetooth® accessory, you have to first pair it with your device.
To edit a Smart Connect™ event
1
Start the Smart Connect™ application.
2
On the Événements tab, tap an event.
3
If the event is switched off, drag the slider to the right to turn it on.
4
Tap Edit event, then adjust the settings as desired.
To delete an event
1
Start the Smart Connect™ application.
2
On the Événements tab, touch and hold the event that you want to delete, then
tap Supprimer des événements.
3
Tap Supprimer to confirm.
You can also open the event that you want to delete, then tap > Supprimer des événements
> Supprimer.
To set Smart Connect™ to read out incoming text messages
1
Start the Smart Connect™ application.
2
Tap , then tap Réglages.
3
Mark the checkbox beside Synthèse de la parole à partir du texte, then confirm
activation, if necessary.
If this feature is turned on, all incoming messages are read aloud. To protect your privacy, you
may need to turn off this feature if you are using your device in a public place or at work, for
example.
Managing accessories
Use the Smart Connect™ application to manage a range of smart accessories that you
can connect to your device, including SmartTags, SmartWatch and Smart Wireless
Headset pro from Sony. Smart Connect™ downloads any necessary applications and
also finds third-party applications, when available. Previously connected accessories
show in a list that allows you to get more information about the features of each
accessory.
To pair and connect an accessory
1
Start the Smart Connect™ application. If you are opening Smart Connect™ for
the first time, tap OK to close the introduction screen.
2
Tap Accessoires, then tap
3
Turn on the Bluetooth® function if it is not already on, then tap the name of the
accessory that you want to pair and connect with.
4
If required, enter a passcode, or confirm the same passcode on both your device
and the accessory.
Il existe une version Internet de cette publication. © Imprimez-la uniquement pour usage privé.
, then find and tap
.
.
119
.
Publicité
Table des Matières
