Cannon OPTIMUM Instructions D'installation page 32

PAIRING A DEVICE TO A SINGLE DOWNRIGGER
PAIRING A DEVICE TO A SINGLE DOWNRIGGER
Cannon offers an app that can be used to control and update
the Cannon downrigger using a Bluetooth
Cannon app is available for download on iOS devices through the
Apple App store or Android devices through the Google Play store.
The Cannon app can be used to control the downrigger using a
device that is paired to the downrigger with a Bluetooth
connection. Before pairing the device with the downrigger, the
Cannon app should first be successfully downloaded. You can
confirm that the app was successfully downloaded by opening it
on your device. The Cannon downrigger will only be able to pair
with one Bluetooth enabled device. It is recommended to review
the "Connecting the Downrigger" section of these instructions to understand how the technology works together and understand how
downriggers function in a network. If you are pairing a device to a single downrigger, it will automatically become the Master downrigger.
If pairing to a series of downriggers, determine which downrigger will be the Master downrigger and then follow steps below and only
work with the Master downrigger during this pairing process. The Master downrigger will be referred to as the BT Master.
1
a. Download the Cannon app on the device
you intend to pair with the downrigger. After
downloading the app, open it to make sure the
download was successful.
b. Once the opening screen launches, the app on
your device will display a Pairing Guide. The guide
will help you pair your Cannon downrigger.
c. Turn the Master Cannon downrigger "on", by
pressing the Power
d. Once the downrigger is powered "on", return to
the device and select "Continue" from the Pairing
Guide screen in the app.
2
e. The Cannon app will begin the pairing process by
helping to determine which downrigger is going
to be assigned the Master downrigger. From the
Pairing Guide, an option to Assign a BT Master
will appear on the device. Select "Yes, Pair to BT
Master" to continue.
NOTICE: The (Bluetooth) BT Master downrigger is the
Master downrigger and needs to have all downriggers,
phone, and transducer connected to it.
32
enabled device. The
®
button on the keypad.
The Cannon app icon. See the Cannon
app section of these instructions (pg 88)
for more information on how to control
the downrigger on the app.
NOTICE: Your device will only be able to connect to a
Cannon and be paired if the device Bluetooth is enabled.
Your device will only be able to pair with a Bluetooth
enabled Cannon downrigger.
1a 1b
NOTICE: When opening the app if a "Downrigger Not
Found" message appears, select "Retry Pairing Setup".
2e
Android
|
© 2021 Johnson Outdoors Marine Electronics, Inc.
1c Keypad on Keypad on
Optimum Optimum
downrigger downrigger
Power Power
Button Button
iOS
|
cannondownriggers.com