Willtek 4100 Série Manuel De L'utilisateur page 182

Willtek 4100
Tester information = A03
+
La numérotation de
l'identificateur ne correspond
pas toujours à des nombres
qui se suivent. Les lacunes
sont intentionnelles.
Call from mobile = A10
Call from base station = A11
Release from mobile = A12
Release from base station = A13
MS power level = A15
Codage utilisé dans les procès-verbaux
Identifier A02;
Extension Bit status* 0
Multiband info* 5
MS Pwr class 1* 4
MS Pwr class 2* 1
MS Pwr class 1900* 3
EFR Speech mode 1
*) Only if Classmark 3 is available
Identifier A03;
Tester model 4106
Tester serial 120025
number
User name MILLER
User company Willtek
Firmware version 2.10
Identifier A10;
Result 0
Identifier A11;
Result 1
Identifier A12;
Result 0
Identifier A13;
Result 0
Identifier A15;
Result 0
Level 5
A FAIL result stands for a failed MS power level change signalling sequence.
A PASS result means a setting or a correct signalling sequence.
0=No, 1=Yes
0=single band mobile
5=GSM900+1800
6=E-GSM900+1800
valid for (E-)GSM900
valid for GSM1800
valid for GSM1900
(Tri-band only)
0=Only FR available
1=EFR available
Model
Serial number
0=PASS, 1=FAIL
0=PASS 1=FAIL
0=PASS 1=FAIL
0=PASS 1=FAIL
0=PASS, 1=FAIL
Power level
6-29