Publicité
Les langues disponibles
Les langues disponibles
Carrycot apron
Raincover
Seat unit
Harness
Bumper bar cap
Bumper bar
Calf support
Cosatto footmuff
(sold separately)
5
24-
Removing:
Open the carrycot hood (See step 16) .
Press the release button on top of the hood frame (a).
Lift the carrycot off the chassis (b).
25-
Fitting:
Removing is a reversal of this procedure.
26-
Fitting:
Removing is a reversal of this procedure.
27-
Using the access zip:
28-
Note: The seat unit can be fitted forward or rearward facing.
29-
Fitting:
30-
Removing:
31-
Adjusting the seat unit recline angle:
WARNING: Never adjust the seat unit with your child in the
seat.
32-
Opening:
33-
Closing:
34-
Adjusting the strap length:
Slide the strap adjustor to suitable length (a, b & c).
35-
Adjusting the shoulder strap position:
Unfasten the top access zip to gain access to shoulder strap retainers (a).
Adjust the shoulder strap position (b & c).
36-
Satisfactory shoulder strap position:
37-
Harness tension:
Always make sure that the harness is correctly tensioned to ensure maximum
protection for your child.
You should only be able to insert 2 fingers between the shoulder strap and waist
strap.
NOTE: Winter/ Summer clothing can make a difference to the size of your child.
38-
Removing:
Unfasten the top access zip to gain access to shoulder strap retainers (See step
35).
Push the shoulder strap retainers through the backrest (a) .
Push the crotch strap retainer through the seat (b).
Rotate the "C" clip to expose its opening (c) and slide the waist strap out of the clip
(d).
Refitting is a reversal of this procedure.
39-
Fitting:
40-
Removing:
41-
Fitting:
42-
Opening:
43-
Removing:
44-
Raising:
45-
Lowering:
46-
Open the harness (See Step 32) and remove chest pads & crotch pad (a).
Push the harness straps through the footmuff (b).
Attach the footmuff fabric fasteners to the rear of the backrest (c).
Refit chest pads & crotch pad then close the harness (See step 33).
Removing is a reversal of this procedure.
Publicité
