TypeS AC530171 Guide D'utilisation page 17

TROUBLESHOOTING:
Issue
Cannot jump start
LED light on the clamp box
keeps flashing
Flashlight does not turn on
No wall adaptor
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
Mon - Fri, 8AM - 5PM (Pacific Time)
Tel: 1-866-294-9244 (English only) | info@typesauto.com
©2021 TYPE S. All rights reserved.
www.typesauto.com
Cause
Wrong clamp
connection
90-Second timer to
jump start has expired.
Low battery status
Protection circuit is
working
Low battery
The unit is charging
Charge via USB cable
Remedy
Make sure to clamp the RED jumper cable to the
POSITIVE (+) post on the car battery. And BLACK
jumper cable to NEGATIVE (-) post or car interior.
Refer to Page 6 for details.
Jump starter timed out. Disconnect the cables from the
vehicle battery and reconnect.
Recharge the unit via USB cable until at least 50%
charge.
Refer to the status table on the indicator box or page
8 of the manual.
Recharge the unit via USB cable.
As a safety precaution, the flashlight light will not work
while the unit is charging. Please unplug the unit from
charging or wait until the unit finishes charging before
using the light.
Plug the USB cable into computer or any USB 5V 2A
wall adaptor.
Made in China