Festo 13 Notice Simplifiee page 16

VIFB13 - 03/05
Circuit example of operating voltage connection
AC
24 V
±
10 %
!
Operating voltage can be switched off separately
! External fuses
" PE
# Potential equalization
Earth cable connection at pin 4 designed for 12 A
Terminating resistor on the last fieldbus slave
If the valve terminal is at the end of the fieldbus system, a
cable termination is required.
Recommendation:
Use the Sub-D plug from Festo (part no. 18529). A suitable RC
network has already been fitted into the housing of the Festo
Sub-D plug. The cable termination must be switched manually
(see "Electronics manual").
16
10 A
24 V 3,15 A
0 V
DC
"
#
9809b