Publicité
Les langues disponibles
Les langues disponibles
Jeep Wrangler 5D
04/2007 - ....
Ref. 1651
Fitting instructions
1. Disassemble the bumper.
2. Place the tow bar over the cross beam at the back of the vehicle matching the provided holes on points
(A). Insert the bolts and tighten everything firmly (see tension).
3. Re-assemble the bumper on the vehicle.
4. Assemble the ball together with the security shackle and the socket plate holder. Insert the bolts and
tighten everything firmly (see tension).
Disassemblage of the bumper
- remove the 6 bolts at the front of the bumper
- 2x2 bolts on a level with the rear wheels and 2 bolts closer to the middle of the bumper
- disassemble the socket of the fog lights.
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
Publicité
