Bike Assembly; Deploy The Product; Insert, Unlock And Remove The Battery - Youin YOU-RIDE DAKAR Manuel De L'utilisateur

Bike Assembly

Deploy the Product

1- Grab the seat and the handlebar. Rotate the front half of the frame forward around
the hinge until the front wheel is in the driving position.
2- Lift the locking lever (picture 1) to fully unfold the frame until you hear a click. Flip
the lever forward and close it so the frame is secured.
3- Turn the pedals to their horizontal position (picture 2).
4- Raise the handlebar to its vertical position and close its locking lever (picture 3).
5- Place the handlebar and the saddle at the desired height (picture 4 and 5).
Picture 1
Picture 4

Insert, unlock and remove the battery

The You-ride Dakar battery is located inside the bike
frame, follow these steps to remove it:
1- Open the lock lever and fold the bike.
2- Unlock the battery with the key.
3- Take out the battery.
4
YOU-RIDE DAKAR
Picture 2
Picture 5
Picture 3