Loewe klang mr1 Guide De L'utilisateur page 19

Loewe klang mr1, klang mr3, klang mr5

Bluetooth operation | Connecting to WDAL2.0 compatible audio system |
Factory reset | Software update | Spotify
6.1 Pairing with the phone/
tablet
To activate Bluetooth pairing when no Bluetooth
device is paired with the speaker:
1. Tap and hold your finger on the top touch
area for 3 seconds to enter Bluetooth pairing.
2. The LED will breathe blue as confirmation.
To activate Bluetooth pairing to pair additional
Bluetooth device:
1. Tap and hold your finger on the top touch
area for 3 seconds to enter Bluetooth mode.
2. Tap and hold your finger on the top touch
area for 3 seconds again to enter Bluetooth
pairing mode. The LED will breathe blue as
confirmation.
Continuation of pairing steps:
3. Turn on Bluetooth on your phone/tab-
let, search for and select "Play-Fi device
(xxxxxx)" to connect. For information on en-
abling Bluetooth, please refer to your phone/
tablet's user guide.
4. After successful pairing, the centre LED will
glow blue.
5. Select and play audio files or mu-
sic on your Bluetooth
If a call is made during playback, the music
pauses. When the call is completed, playback
resumes.
6.2 Connecting to a paired
device
1. Tap and hold your finger on the top touch
area for 3 seconds to enter Bluetooth mode.
2. The previously paired phone/tablet is auto-
matically connected to the speaker.
Note
ƒ The speaker stays in paring mode for only 45
seconds. If no device is paired with it during
this time, it switches back to the last active
source.
ƒ The maximum operating range between the
speaker and a Bluetooth device is approxi-
mately 10 meters.
ƒ Compatibility with all Bluetooth devices is
not guaranteed.
7 Connecting to
WDAL2.0 compatible
audio system
If you own a Loewe audio system with WDAL2.0
function, this speaker can be integrated into this
system and will be used to play one of the avail-
able audio channels. Up to 5 speakers and one
subwoofer can be connected to the WDAL2.0
audio system. A complete set of speakers prop-
erly set up in your room will create true surround
sound.
7.1 Pairing to the WDAL2.0
audio system
1. Press and hold the PAIRING button on the
bottom of the speaker for 3 seconds to enter
WDAL2.0 pairing mode. As confirmation, the
LED on the top will breathe teal. The speaker
stays in paring mode for only 45 seconds.
2. Press the pairing button on your WDAL2.0
audio system. For information on enabling
WDAL2.0 pairing, see the user guide of the
audio system. After successful pairing, the
centre LED of the speaker will be solid teal.
3. Set which audio channel the speaker should
play. Options: Surround left, Front left, Cen-
tre, Front right, Surround right. To do this,
device.
press and hold one of the 5 buttons on the
top of the speaker. Each button represents
different channel.
SL
FL C
SL – surround left channel
FL – front left channel
C – centre channel
FR – front right channel
SR – surround right channel
4. Set WDAL2.0 switch of the audio system to
"SMALL" for the corresponding channel.
See the audio system user guide for more
information.
Note:
ƒ If pairing and channel selection were suc-
cessful, the LEDs on the top will turn off in
10 seconds.
ƒ If pairing or channel selection fails, the
speaker will return to the previous source.
ƒ WDAL2.0 mode has the highest priority
and it is not possible to switch the speaker
to another source, unless the master audio
system is turned off/in standby.
ƒ When WDAL2.0 master audio system is
turned on, the paired speaker automatically
switches to WDAL2.0 mode.
ƒ When the speaker is in WDAL2.0 mode, it is
not possible to change the volume or mute
the sound using the speaker. This can only be
done using the master audio system.
ƒ When WDAL2.0 is connected, the speaker's
LED is teal. However, the LED will turn off af-
ter 60 seconds so as not to disturb when
watching TV in a dark room. With a single
tap, the light turns back on.
7.2
If the speaker is already paired via WDAL2.0 and
you want to use it to play another channel, follow
these steps:
1. Press the PAIRING button on the bottom of
the speaker. The LED on the top lights up teal.
2. The LED representing the current channel
will also light up.
3. Press and hold the button corresponding to
the new channel for 3 seconds.
4. Previous LED will turn off and new channel
LED will light up.
5. Set WDAL2.0 switch of the audio system to
"SMALL" for the corresponding channel.
8
Resets the device to the default settings. Press
and hold the WPS and PAIRING buttons on the
bottom of the speaker for at least 3 seconds to
restore the default settings.
9
To upgrade speaker firmware:
SR
FR
The latest software can be found at:
www.loewe.tv/int/support
Follow the installation steps in the document
supplied with the software.
To upgrade the multiroom function of your
speaker:
1. Download and install the DTS Play-Fi app on
your mobile device.
2. Connect the speaker to the app.
3. If new Play-Fi software is available, the appli-
cation notifies you.
4. Follow the instructions in the application to
run the multiroom feature update.
Changing the audio channel
Factory reset
Software update
19