Declaration Of Conformity; Technical Data - Husqvarna GBV 325 Manuel D'utilisation

DECLARATION OF CONFORMITY

EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46- -36- -146500, as authorised
representative in the Community, declare that the garden blower/vacuum model McCulloch
GBV 325 with serial numbers dating from 2012 and onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S
DIRECTIVES:
of 17 May 2006 "relating to machinery" 2006/42/EC;
of 15 December 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable
supplements; and
of 8 May 2000 "relating to the noise emissions in the environment" in accordance with Annex
V of 2000/14/EC. For information relating to noise emissions, see Technical data section.
The following standards have been applied: EN ISO 12100-1/A1:2009, EN ISO
12100-2/A1:2009, CISPR 12:2007.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, S- -754 50 Uppsala, Sweden, has
performed voluntary type examination on behalf of Husqvarna AB. The certificate(s) are
numbered: SEC/09/2024.
12- -11- -15
MODEL: GBV 325
ENGINE
Engine displacement, cm
Maximum Engine Power, according to ISO 8893, kW
Idle Speed +/- - 400, rpm
Catalytic converter muffler
IGNITION SYSTEM
Spark plug
Electrode gap, mm
FUEL AND LIBRICATION SYSTEM
Fuel tank capacity, cm
WEIGHT
Weight without fuel and tubes, kg
NOISE EMISSIONS
(see Note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
SOUND LEVELS
(see Note 2)
Equivalent sound pressure level at the operator's ear, measured
according to ISO 22868, dB(A)
Equipped with blower tubes and nozzle (original)
Equipped with vacuum tubes (original)
VIBRATION LEVELS
(see Note 3)
Equivalent vibration levels (a
according to ISO 22867, m/s
Equipped with blower tubes and nozzle (original), right
Equipped with vacuum tubes (original), left/right
Note 1: Noise emissions in the environment measured as sound power (L
with EC directive 2000/14/EC. Reported sound power level for the machine has been mea-
sured with the original cutting attachment that gives the highest level. The difference between
guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the
same model according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical
statistical dispersion (standard deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (stan-
dard deviation) of 1 m/s
Ronnie E. Goldman, Director of Engineering
Authorized representative for Husqvarna AB and
responsible for technical documentation

TECHNICAL DATA

3
3
dB(A)
WA
) at handles, measured
hv,eq
2
2
.
-- 13 --
25
0,75
3700
Yes
Champion RCJ- -6Y
0,6
540
4,4
103,9
108,0
96,7
98,6
10,1
8,2/10,4
) in conformity
WA