Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Removing the Packaging Material
1
Remove the packaging material.
2
Assembling the Printer Stand
3
Attaching the Roll Unit
4
Assembling the Stacker
5
Installing the Printer
If you are not using the stand, install the printer in a location like the following.
1
Lift up the printer.
●
For details on how to carry and the number of people, refer to
"Handling Cautions" (p. 3).
2
Remove all of the tape and other packaging material.
Remove the tape affixed to the roll holder.
Assemble the stand by referring to the Printer Stand Setup Guide (separate manual). If you are
not using the stand, proceed to "
If you purchased the optional roll unit, attach the roll unit by referring to the Roll Unit Setup
Guide (separate manual). If you are not using the roll unit, proceed to "
Printer".
If you purchased the optional stacker, attach the stacker by referring to the Stacker Setup Guide
(separate manual). If you are not using the stacker, proceed to "
2
Place the printer on a stable flat location.
4
Installing the Printer".
5
6
Turning On the
6
Turning On the Printer".
Publicité
Table des Matières
