Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. DESCRIZIONE DEI COMPONENTI
Heating water storage for integrated systems
Introduction
The boiler has been designed to integrate more energy sources present
in the heating system, for example: heat pump, thermal solar panels, gas
boiler, etc..., made of :
• A heating water tank made of internally painted S235JR and provided
with rigid thermal insulation, covered by a grey coloured PVC mantel: 70
mm thick injected polyurethane with thermal conductivity coefficient of
0.025 W/mK and Fire reaction class B3 DIN 4102;
• Lower fixed serpentine for the solar panels connection;
• Finned copper serpentine for the fast production of DHW, integrated,
with the appropriate fixing flange, on the higher part of the tank.
• In compliance with directive 2014/68/EU, art. 4.3.
Technical specifications
Heating water total capacity
External diameter
Total height with insulation
Maximum height in straightening
Max. operating pressure:
Max. operating temperature
Empty weight
Domestic exchanger
Flange (Ø external / internal)
Exchanger surface
Serpentine water content
DHW production 80 / 60 °C (DIN 4708)
Power consumption
Necessary serpentine flow rate
Load losses
Coefficient (DIN 4708)
Max. operating pressure of the exchanger
DHW production (input 15 °C / output 40 °C / with storage 50 °C)
Solar exchanger
Exchanger surface
Lower serpentine water content
Power consumption
Necessary serpentine flow rate
DHW production 80 / 60 °C (DIN 4708)
Load losses
Max. operating pressure of the exchanger
Installation prescriptions
The hydraulic installation and the heating water storage connection, must be carried out in respect of the current standards and regulations in the place of
installation and in respect of the designer of the thermal installation prescriptions, in particular:
• The storage installation operations, must be carried out by technically qualified personnel.
• The unit must be installed in an environment void of frost and atmospheric agents.
• The unit must be positioned respecting the minimal technical spaces, keeping in mind the accessibility to the electric and water connections.
• The installation of shut-off valves that isolate the unit from the rest of the plant, as well as the discharge cocks installation/storage is necessary.
• It is compulsory to assemble a metal mesh filter on the input piping (a squared mesh with side not greater than 0.8 mm) having adequate load losses and dimensions.
• A correct positioning of the unit includes its levelling and a support plane able to hold the weight.
• Ensure that the water's supply pressure does not exceed the storage rating value, provide a pressure reducer.
• Install the safety valve calibrated according to that stated on the storage tag.
• Install the relative expansion vessels, sized according to the capacity and use of the respective circuits.
• To avoid storage corrosion or damage phenomena, ensure that the water and the connections are compatible with the storage. The potability chemical and
physical features of the DCW must be such not to corrode or scale the copper exchanger and have a hardness of less than 15 f°, otherwise, the installation
of an appropriate chemical treatment (i.e. softener) will need to be foreseen.
• Two dielectric joints are partially screwed onto the serpentine connections. In order to ensure a proper sealing connection, it is therefore necessary to
place a suitable sealing material between the joint and the thread of the coupling and then screw the joint back onto the coupling. If any, the connecting
pipes are not in metallic meters (eg multilayer pipes) the use of dielectric joints is not necessary.
Features
• Hydraulic compensator
• Heating solar integration
• Condensation boiler integration
• Heat pump eventual integration
• Wood burner eventual integration
• Stratification with hydraulic chimney
• Instantaneous domestic water production
• Complete hygiene
• Long duration
Model EB300-S15-AS50
Model EB500-S18-AS50
267 ℓ
Ø 640 mm
1630 mm
1750 mm
3 bar
95 °C
138 kg
300 / 210 mm
5 m
2
3,5 ℓ
2,5 m
/h
3
100 kW
4,3 m
/h
3
4,4 bar
33 NL
10 bar
15 ℓ/min
1,4 m
2
8,3 ℓ
34 kW
1,5 m
/h
3
0,8 m
/h
3
34 mbar
6 bar
GB
GB
IT IT
467 ℓ
Ø 790 mm
1680 mm
1860 mm
3 bar
95 °C
150 kg
300 / 210 mm
5 m
2
3,5 ℓ
2,5 m
/h
3
100 kW
4,3 m
/h
3
4,4 bar
33 NL
10 bar
15 ℓ/min
1,8 m
2
10,3 ℓ
44 kW
1,9 m
/h
3
1,1 m
/h
3
69 mbar
6 bar
7
Publicité
Table des Matières
