Télécharger Imprimer la page

Cardin Elettronica RCQ-3G/WF Mise En Service Et Utilisation page 31

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ERROR SITUATIONS
• The receiver is fitted with error diagnostics. The error situations are indicated on the display by the
symbol "E" flashing followed by an error identification number.
The error numbers are as follows:
Code
Message
E00
INCOMPATIBLE MEMORY
E01
MISSING MEMORY
E02
PARAMETERS
E03
FULL MEMORY
E04
MEMORY
E05
FORBIDDEN
E06
SYSTEM
E07
PIN ERROR
E08
CORRUPT PIN
E09
SIM CODES
E10
CAR CODE
*
Warning! The S504/S508 memory module contains particular values which are inserted when the entire
memory content is wiped and identify and enable it for use.
If the memory type is not recognised it cannot be used unless you first cancel the entire memory content.
The error codes E07-E08-E09-E10 derive from functions that are only available through the use of a
PGM449 or software. Consult the instructions supplied with the specific product for more information. If
the error persists contact the after sales service.
CONNECTION PARAMETER INDICATIONS
REQUIRED:
APN SRVN SRVP
The memory format is incompatible (
Replace the memory module or cancel the entire memory content.
The memory chip M1 is missing or damaged
Insert or replace the memory chip M1
Receiver base parameter error
The corrupt parameters will be replaced with default values
Full memory
all memory locations have been occupied
Generic memory error
Memory access problem. Repeat the operation.
Illegal operation.
General system error.
PIN code error
The code was automatically reconstructed
The PIN code cannot be reconstructed
SIM code error
The 3G/WF card cannot be used
Remote activation code error
The function has been disabled
When the receiver starts up this indicates that one or more parameters, required
for the correct connection to the server, are missing. Each acronym indicates that
a specific parameter is missing according to the following: APN=Access Point
Name, SRVN=Gateway, SRVP=Port. The receiver parameter insertion method
is described in the CardinTX_SW software instructions.
Error description
31
).
*

Publicité

loading

Ce manuel est également adapté pour:

Zvl565.00