Philips RQ1100 Serie Manuel page 28

English
28
Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Possible cause
The shaving heads are
damaged or worn.
Long hairs obstruct the
shaving heads.
Specific types only: The
Jet Clean System has
not cleaned the shaver
properly, because the
cleaning fluid in the
cleaning chamber is
soiled or the cleaning
fluid level is too low.
The rechargeable
battery is empty.
Specific types only: The
travel lock is activated.
The shaving head holder
is soiled or damaged to
such an extent that the
motor cannot run.
Solution
Replace the shaving
head holder (see
chapter 'Replacement').
Clean the shaving heads
by following the steps
of the extra-thorough
cleaning method (see
chapter 'Cleaning and
maintenance').
Clean the shaver
thoroughly before you
continue shaving. If
necessary, clean and refill
the cleaning chamber
(see chapter 'Cleaning
and maintenance').
Recharge the battery
(see chapter 'Charging').
Press the on/off button
for 3 seconds to
deactivate the travel
lock.
Clean the shaving head
holder or replace it
(see chapters 'Cleaning
and maintenance' and
'Replacement').