Travel Lock - Philips Rq1100 Serie Manuel

English
12

Travel lock

You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
activating the travel lock
1 Press the on/off button for 3 seconds to enter
the travel lock mode.
, The lock symbol lights up on the display.
Note: The displays of the various shaver types look
different, but show the same symbol.
deactivating the travel lock
1 Press the on/off button for 3 seconds.
, The motor starts running to indicate that the
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-
in charger or Jet Clean System, the travel lock is
automatically deactivated.
Replace shaving head holder
Note: The displays of the various shaver types look
different, but show the same symbol.
For maximum shaving performance, we advise you
to replace the shaving head holder every 12 months.
- To remind you to replace the shaving head holder,
the appliance is equipped with a replacement
reminder which is activated automatically after
approx. 12 months. The replacement reminder is
repeated at 9 successive shaves or until you reset
the shaver.