ARO 8446-B5 Mode D'emploi page 3

WARNING
Always wear eye protection
when operating or
performing maintenance
on this tool.
Lubrication
Where Used ARO Part #
O- - Rings & Lip Seals
Gears and Bearings
Always use an air line lubricator with these tools.
We recommend the following Filter- - Regulator - - Lubricator
(FRL) Unit:
ARO Model 29231- - 110 plus 100067 Gauge
Do not mark any nonmetallic surface on this tool with customer identification codes. Such actions could affect
tool performance.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
WARNING SYMBOL IDENTIFICATION
SERVICING THE TOOL
Oil
Description
36460 4 oz. Stringy
Lubricant
Grease
33153 5 lb. "EP" - - NLGI
#1 Grease
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
WARNING
Read this manual before
operating tool.
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency
Shut--Off
Valve
Lubricator Regulator
Drain Regularly
CAUTION
CAUTION NOTICE
3
WARNING
Always wear hearing
protection when operating
this tool.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
L
F
Filter
FRL
Compressor
(Dwg. TPD905- -2)