Publicité
Les langues disponibles
Les langues disponibles
Control Panel & Remote Control
(Infrared)
LED Display Screen
The fan may be operated by the control panel or by your remote control as shown in
the images above.
1. Place the fan on a stable and flat surface. Plug the power cord into the
electrical outlet (220-240 V ~ 50-60 Hz).
Turn on the power and you will hear a "Beep" sound
2. POWER: Turn the fan ON by pressing this
button (Start at Speed Level 1)
3. SPEED: Press this/these button/s to adjust
the fan speed to the desired level.
The fan has a total of 12 speeds. (Level 1 to
Level 12)
The speed setting will be displayed
accordingly on the base LED display screen
4. OSC 69° (UP/DOWN) 54° UP, 15° DOWN:
Press this button to adjust the up and down
oscillation of the fan.
Press this button again to stop oscillation
movement.
44
|
Instruction Manual ecoQ SilentAir Uno
Control Panel
Remote Control
(Press and hold
for 1 sec)
LED display Screen:
LED display Screen:
Publicité
