Frequently Asked Questions (Faq) - Nyne NH-6500 Manuel Utilisateur

6 Frequently asked
questions (FAQ)
Never try to repair the device yourself
as you may void your warranty. When
you encounter any problems, read the
FAQ before you take the device for
repair. You may also visit www.nyne.
com/support for help.
Contact your dealer if any of the
following occurs:
The power cord frays or fails.
Liquid sprays or any object drops
into the device.
The device is exposed to rain or
other moisture.
The device is dropped or
damaged in any way.
The performance of the device
changes substantially.
Why is there no power?
Check whether you have
connected the power cord to
both the device and wall socket
securely.
Check whether the mains power is
interrupted.
Check whether you have turned
the
the back of the device to the
position.
Press on the remote control to
turn on the device.
Why is there no sound or only distorted sound?
Press
top panel) repeatedly to adjust
volume.
28 EN
NYNE NH-6500_User Manual_A5.indb 28
switch on
on the remote
on the
Press
on the remote control repeatedly
to adjust the bass or treble level.
Check whether the sound output
is muted. Press
remote control to resume sound
output.
Make sure that you have selected
an audio source for play.
If you have selected the dock
source, check whether you have
docked your iPod/iPhone/iPad
securely. If you have a protective
case on your iPod/iPhone/iPad,
remove it and try again.
If you have selected the disc, USB,
or SD source, make sure that the
formats of media on the disc, or in
the USB mass storage device or SD
card are supported.
If you have selected the Bluetooth
source, check whether the
Bluetooth connected device
Check the user manual of the
device for details.
If you have selected the Bluetooth
source, check whether wireless
connection has been set up
between the paired device and
NH-6500.
If you are listening from an auxiliary
device, check the following points:
Make sure that you have
started music play on your
auxiliary device.
Try to adjust volume on your
auxiliary device.
Check whether the RCA-to-
3.5mm audio cable has been
connected securely to both the
multifunction Bluetooth docking
speaker and auxiliary device.
Why is "ND" (no disc) displayed on the LED screen?
Insert a CD/MP3 disc into the slot-in
disc loader.
Check whether the disc has been
inserted upside down. Make sure
that the label side faces up.
or
on the
5/19/2012 6:13:32 PM