Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FULLY
Step 22: Assemble the two sets of the door assembly (28) to the cabinet, please note that
must insert the holes under the door to the pin, and press the spring catch, then to insert
the hole from the door assemble to the spring catch, shown as the picture.
22
23
Step 23: Hang the single loop end of lighting candle assembly (33) onto the pre-installed
screw on right firebox. (see illustration below)
Step 24: Connect the correct flexible hose to the gas inlet connection.
1) If the gas inlet is a nozzle, plug in the hose and fix it with a clamp firmly.
2) If the gas inlet is a thread type, connect the flexible hose with left thread connector.
Check up the gas tightness after connection.
The flexible tube should avoid coming in contract with hot surface or directly placing
below the side burner.
A
1x
41
Publicité
Table des Matières
