Télécharger Imprimer la page

YORKVILLE EXM Mobile 8 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

Main Output and Main Input Jacks
The Main Output and Main Input jacks are in parallel and we have provided both a male and female XLR to help make
it more convenient to 'link' EXM 70/Mobile/Mobile12/Mobile8 enclosures together. To use the Link feature, insert a
standard XLR patch cable between cabinets.
MAIN Output
Battery Status Indicators
The EXM Mobile/Mobile12 has a series of four green LEDs to indicate the approximate charge level. The
upper green LED is illuminated if there is greater than 75% charge in the battery. The red LED only will
indicate that the battery is critically low (approximately 10% remaining) and needs immediate charging.
The indicators will be engaged only when the power switch is turned on.
Low-Power "Sleep" State
The EXMMobile8 features a special "sleep" mode which reduces energy consumption when the system is
not in use and this also preserves battery life. This mode is automatic and nearly undetectable to users
when the EXMMobile8 is configured properly. To ensure the sleep state doesn't interfere with normal
operation, the output level should be controlled with the Master control, especially where quiet playback
is desired.
Charging Indicator
Whenever AC is connected to the unit, the charging indicator will be turned on. If it is green, the unit
is fully charged. If it is red, the unit is in the process of charging.
Charging the EXMMobile8
To charge the EXMMobile8, plug it into an AC power source using the included power cord. The
charging indicator LED is the best indication of the charging status; even if all of the battery status
LEDs are lit, there is still possibly some additional charging time required. The EXMMobile8 can
be safely left connected to AC power for charging indefinitely. It will intelligently control its own
charging regime when plugged in long-term.
The EXMMobile8 will not charge when the temperature is below 0° C or above 45° C.
If the EXMMobile8 is going to be stored unused for a long period of time (greater than 6 months) it is
advisable to periodically plug it in to charge up the battery.
If the EXMMobile8 has been stored for a long period of time unused and it has not been maintained, it is
advisable to connect the charger and leave it plugged in for approximately 24 hours.
The EXM Mobile 8 is delivered with 40-50% of
the charge capacity. Please charge your unit for
5-hours prior to initial battery operation!
MAIN Input
4
Fully Charged
Pair ing :
Charging
Hold for
4 seconds
Power
EXM

Publicité

loading