Publicité
Les langues disponibles
Les langues disponibles
Level Control
Streamed music volume can be changed via the connected Bluetooth™ device, or via the Channel
3 Level control on the EXM Mobile8. The Channel 3 Level will also control the maximum volume
level a connected device can set.
Stereo Mode
The EXM Mobile8 supports wireless stereo playback between two EXM Mobile8 cabinets, for an
enhanced listening experience. One cabinet will act as the Primary unit, while the other acts as
a Secondary unit. The Primary unit will play the left audio channel of streamed music, and also
maintain the Bluetooth™ connection with your device, while the Secondary unit will play the
right audio channel. Your device only connects to the Primary unit, not the Secondary.
To enable Stereo Mode, simply double tap the Bluetooth™ button on the EXM Mobile8 that
should act as the Primary unit (left channel), then double tap the Bluetooth™ button on the
other EXM Mobile8 (right channel). The order matters, as the first unit double tapped will become
the Primary unit (left channel). Both EXM Mobile8 units will automatically attempt to re-estab-
lish the Stereo Mode connection the next time they are powered on and enabled, with the same
Primary and Secondary roles previously used.
You can still pair new devices to an EXM Mobile8 Primary unit if it is in Stereo Mode. Pairing a
device to an EXM Mobile8 that is in Secondary mode will end the stereo wireless connection.
Button Operation
Single Tap – Enables Bluetooth™
Double Tap – Enter Stereo Mode
Press and Hold (4 seconds) – Enter Pairing Mode
Press and Hold (8 seconds) – Disables Bluetooth™
Range
The EXM's Bluetooth™ operating range is rated for 10 meters (33 feet) line of sight. The quality of
the link can be affected by an excess of traffic in the 2.4 GHz bandwidth or structures between the
Bluetooth™ unit and the streaming device.
Note: When connected with Bluetooth™, ALL audio is streamed from your device. If you don't
want your streaming music to be interrupted, turn off 'notifications' on your device
Channel Controls
Level Control
The EXMMobile8 features active channel input circuitry with exceptionally high audio headroom.
The Level control adjusts the channel gain over an 85 dB range. Use this control to adjust the
channel's level in the overall system mix.
Shape Control
Setting this control towards 'Music' shapes the response to be suited for reproducing prerecorded
music while setting the control towards 'Speech' accentuates the mid-frequencies which help
speech and vocals. The response is flat in the center position.
Reverb Control
This control determines how much Reverb is applied to the corresponding channel.
Master Section
M A S T E R
Master Control
The Master Control is used to set the overall level of the Yorkville EXMMobile8.
Note: When two systems are linked together, the Master Control only affects the level of the unit
on which it is located.
Main Output / Main Input Section
In situations where additional bass or input channels are needed, The Link jacks can be used to connect
multiple EXM 70/Mobile/Mobile12/Mobile8 systems and/or a subwoofer.
3
EXM
Publicité
