Introduction; Central Unit Description; Operating Features - Hiltron PROTEC3 Mode D'emploi

1

Introduction

Dear customer,
we desire thank you for buying this product. We recommend us to read this manual with
attention, because it will be very useful in phase of installation and use.
As CIA customer you can make use of a series of services, such as the technical telephone
assistance on the products.
1.1

Central unit description

The PROTEC3 is a burglary central unit with microprocessor technology to use on the
whole of a burglary protection system for habitation and commercial rooms of small and middle
dimensions.
It is to be used with the perimetral protection magnetic sensors, and/or with the volumetric
detectors.
The alarm can be:sounding/luminous,with the autopowered SA310 siren for outdoor use;
sounding, with the piezoelectric SP31 siren for inside use; telephonic, with the TDX16
telephone dialer.
1.2

Operating features

System enabling/disabling by built-in mechanic key,or optional command systems
Antiopening protection tamper
Auto-inhibition of every zones, if it not restored, after it had born an alarm
Control LED voltage present,time of exit,alarm state,zones state,alarm memory,fusible
state services
Output activation sirens Ext/Int,positive present of system activated
Introduction
19