Troubleshooting; Storage; Disposal; To Discard The Product - Burns & Barkles 010376 Instructions D'utilisation

Barbecue au gaz
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

6 Troubleshooting

Problem
There is a gas leakage from a hose.
There is a gas leakage from the gas cylinder.
There is gas leakage from the gas valve on the gas
cylinder.
The burners do not operate.
There is a small flame or flashback (fire in the burner
tube that makes a hissing noise).
The knob on the gas valve is difficult to turn.

7 Storage

Warning! Let the product become cool before you put the product
in storage.
● Put a protective cover over the product if you keep it outdoors.
● For winter storage or long-term storage, keep the product protected from
weather.
● Make sure that the storage comply with local regulations for storage of
gas cylinders.

8 Disposal

8.1 To discard the product

● Make sure that you follow local regulations when you discard the
product. Do not burn the product.

9 Technical data

Technical data
Gas and supply pressure
Product category
Injector size, main burner
Injector size, side burner
Total nominal heat output
Lighting
Grill surface dimensions
Weight
Dimensions
Thermometer
Number of main burners
Number of side burners
2022_001
Damaged hose.
The gas cylinder is defective or damaged.
The gas valve on the gas cylinder is not fully
closed.
The gas cylinder is empty.
The regulator is defective.
The burner, hoses or the nozzles are blocked.
The burner, hoses or the nozzles are blocked.
There is strong wind.
The gas valve is jammed.
Butane or propane, 30 mbar
I3B/P(30)
Ø 0.82 mm
Ø 0.85 mm
19.6 kW / 1426 g/h
Integrated
900x415 mm
50 kg
1620x1130x550 mm
Yes
6
1
Cause
Close the gas valve on the gas cylinder and
replace the damaged hose.
Replace the gas cylinder. Speak to the supplier of
the gas cylinder.
Close the gas valve on the cylinder fully.
Replace the gas cylinder.
Replace the regulator.
Clean the burners, hoses and nozzles.
Clean the burners, hoses and nozzles.
Turn all control knobs to the "OFF" position and
close the gas valve on the gas cylinder. Move the
product to an area with less wind.
Replace the gas valve.
Action
17

Publicité

Table des Matières
loading

Table des Matières