After Finishing Work; Maintenance Instructions; First Aid - Makita PM7650H Manuel D'utilisation Et De Sécurité

Masquer les pouces Voir aussi pour PM7650H:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

After finishing work

Always wash yourself thoroughly with soap and water after spraying or handling
chemicals. Shower immediately, and wash all protective clothing separately from
other items.
Follow any additional recommendations of the chemical manufacturer.
Always clean dust and dirt off the mist blower.
Empty, rinse and clean solution tank and assembly after each use. This helps
to prevent the solution from crystallizing, which could later cause clogging
and chemical damage to the unit. In addition, residual chemicals may have
undesirable effects during subsequent spraying with a different type of chemical
(e.g., residual herbicide may damage or kill plants being sprayed with a pesticide).
Do not store the mist blower with spray solution in the solution tank.

Maintenance instructions

Be kind to the environment. Operate the mist blower with as little noise and
pollution as possible. In particular check the correct adjustment of the carburetor.
Clean the mist blower at regular intervals and check that all screws and nuts are
securely tightened.
Never service or store the mist blower in the vicinity of open flames, sparks, etc.
(13).
Always store the mist blower in a well-ventilated locked room and with an emptied
fuel tank and the emptied solution tank.
Observe and follow all relevant accident prevention instructions issued by the trade associations and by insurance companies.
Do not perform any modifications to the mist blower as this will risk your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in this instruction manual. All other work is
to be done by Authorized Service Agents.
Use only genuine spare parts and accessories supplied by MAKITA.
Use of non-approved accessories and tools means increased risk of accidents and injuries. MAKITA will not accept any liability for accidents or
damage caused by the use of any non-approved attachment or accessories.

First Aid

In case of accident make sure that a well-stocked first-aid kit is available in the
vicinity of the operations. Immediately replace any item taken from the first aid kit.
When asking for help, please give the following information:
Place of accident
What happened
Number of injured persons
Extent of injuries
Your name
Packaging
The MAKITA mist blower is delivered in a protective cardboard box to prevent
shipping damage. Cardboard is a basic raw material and is therefore consequently
reusable or suitable for recycling (waste paper recycling).
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained from repeated use) replace
strict adherence to safety rules for the subject product. MISUSE or failure to follow
the safety rules stated in this instruction manual may cause serious personal injury.
(13)
8

Publicité

Table des Matières
loading

Table des Matières