Marantz professional PMD-750TA Guide D'utilisation page 8

Operation
To set up and use your PMD-750TA, follow the steps in the
Transmitter and Receiver
using two transmitters, set up each transmitter one at a time, and keep each
transmitter powered on as you set up the additional unit.
XLR Transmitter Menu
The number of paired
transmitters (in the
order that they were
paired)
Main Menu:
•
Mute/unmute the transmitter by quickly pressing and releasing the
Power button.
Pairing Mode:
•
Press the navigation buttons to move the cursor to the TX icon. Once
TX is highlighted, the icon will display PAIR. Press Enter to go into
pairing mode and the icon will flash to wait for the receiver to pair. Once
paired, the icon will be lit solid.
RF Level:
•
Press and release the Enter button on the receiver to highlight the
meter and use the navigation buttons to adjust the RF power. The
default setting is 10 dBm. You can set this to: -1, 3, 5, 8, 10, 12, 14, 16,
20 dBm.
8
chapter in order. If you are setting up a system
RF Level power
adjustment
Transmitter/Pairing
Transmitter Battery
Level
Pairing the