THOMSON DSC 325B Mode D'emploi page 42

D - CONFIGURATION AND USE
3 - CONFIGURATION USING A WEB BROWSER
Warning: frequent policy changes made by the
main web browser developers as well as the
number of possible confi gurations and versions can
make it tricky to confi gure your camera. If possible,
it is preferable to use a smartphone, tablet or
dedicated software.
• Download the IP Camera Tool software from
our website: http://www.thomsonsecurity.eu/
docs.php?lang=FR&type=5&ref=512376 docs.php?lang=FR&type=5&ref=512376
• This will detect your camera on the network
and show its IP address.
• Double-click its name to open the camera
confi guration in your web browser.
Your browser will need an additional module to
display the image from your camera correctly and
will ask you if you want to install it. Accept the
request to allow your browser to display the image:
Note: Depending on which browser you are using,
the procedure may differ but the principle remains
the same: you must permanently allow the module
to run if you want your camera to work properly in
your browser.
18
EN
u . e i t y u r e c n s s o m o t h w . w w
1080P HD WIFI IP CAMERA
Select the display language, then enter the username
and password for connecting to your camera. The
default username is admin and the password is left
blank, so you should leave the fi eld empty. At the
fi rst connection, the camera will immediately ask you
to replace the default username and password to
improve security:
When you have fi nished changing the username
and password, you will be asked to log back in.
Once you have logged in with your new username
and password, the camera feed will be displayed: