Télécharger Imprimer la page

General Motors 350HO Caractéristiques Techniques

Moteur de luxe

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

PERFORMANCE
GM
PARTS
This 350HO Deluxe Crate Engine documentation should be used in conjunction with the 350HO long block
instruction sheet, GM part number 19172475. The documentation included within this information packet
builds on the 350HO long block information. Please locate the 350HO long block information and begin there.
This is the second section of the instruction for the 350HO deluxe engine assembly.
Thank you for choosing GM Performance Parts as your high performance source. GM Performance Parts is committed
to providing proven, innovative performance technology that is truly.... more than just power. GM Performance Parts are
engineered, developed and tested to exceed your expectations for fit and function. Please refer to our catalog for the GM
Performance Parts Authorized Center nearest you or visit our website at www.gmperformanceparts.com.
This publication provides general information on components and procedures which may be useful when
installing or servicing a 350HO Deluxe Engine. Please read this entire publication before starting work. Also,
please verify that all of the components listed in the Package Contents section below were shipped in the kit.
The information below is divided into the following sections: package contents, component information, 350HO
Deluxe Engine specifications, additional parts that you may need to purchase, torque specifications, and a
service parts list.
The 350HO Deluxe Engine incorporates modern technology in a package that can be installed in applications
where 265-400ci small block Chevrolet V-8's were originally used. This complete engine is assembled using
brand new, premium quality components. Due to the wide variety of vehicles in which a 350HO Deluxe Engine
can be installed, some procedures and recommendations may not apply to specific applications.
The 350HO Deluxe Engine is manufactured on current production tooling; consequently you may encounter
dissimilarities between the 350HO Deluxe Engine assembly and previous versions of the small block V-8. In
general, items such as motor mounts, accessory drives, exhaust manifolds, etc. can be transferred to a
350HO Deluxe when it is installed in a vehicle originally equipped with a small block V-8 engine. However, as
noted in the following sections, there may be minor differences between a 350HO Deluxe Engine and an older
small block V-8 engine. These differences may require modifications or additional components not included
with the 350HO Deluxe Engine. When installing a 350HO Deluxe Engine in a vehicle not originally equipped
with a small block V-8, it may be necessary to adapt or fabricate various components for the cooling, fuel,
electrical, and exhaust systems.
It is not the intent of these specifications to replace the comprehensive and detailed service practices ex-
plained in the GM service manuals.
For information about warranty coverage, please contact your local GM Performance Parts dealer.
Observe all safety precautions and warnings in the service manuals when installing a 350HO Deluxe Engine in
any vehicle. Wear eye protection and appropriate protective clothing. When working under or around the
vehicle support it securely with jackstands. Use only the proper tools. Exercise extreme caution when working
with flammable, corrosive, and hazardous liquids and materials. Some procedures require special equipment
and skills. If you do not have the appropriate training, expertise, and tools to perform any part of this conver-
sion safely, this work should be done by a professional.
350HO Deluxe Engine Specifications
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GMSPO SPECIFICATIONS.
350HO Deluxe Engine (12496968) Specifications
Specifications Part Number 12487544
REV16JL08
PART NO.
DATE
REVISION
21MY07
Initial Release - Rusty Sampsel
16JL08
Revised - Rusty Sampsel
GENERAL MOTORS
SERVICE PARTS OPERATIONS
6200 Grand Pointe Drive, Grand Blanc, MI 48439
12487544
1
PAGE
30
OF
AUTH

Publicité

loading

Sommaire des Matières pour General Motors 350HO

  • Page 1 350HO Deluxe when it is installed in a vehicle originally equipped with a small block V-8 engine. However, as noted in the following sections, there may be minor differences between a 350HO Deluxe Engine and an older small block V-8 engine.
  • Page 2 This publication is intended to provide information about the 350HO Deluxe Engine and related components. This manual also describes procedures and modifications that may be useful during the installation of a 350HO Deluxe Engine. It is not intended to replace the comprehensive service manuals and parts catalogs which cover General Motors engines and components.
  • Page 3 SERVICE PARTS OPERATIONS PARTS 6200 Grand Pointe Drive, Grand Blanc, MI 48439 350HO Deluxe Engine Torque Specifications: Camshaft retainer bolt/screw ........106 in.-lbs. / 12 N·m Camshaft sprocket bolt/screw ......... 18 ft.-lbs. / 25 N·m Connecting rod nut ........... .006” bolt stretch preferred 20 ft.-lbs. + additional 55º...
  • Page 4 (EGR) valve or a hot air choke. Water Pump: The 350 HO Deluxe engine comes with a long style cast iron water pump, GM Part Number 12529305. The cooling system has a 180° F thermostat installed. 12487544 350HO Deluxe Engine Specifications REV16JL08 TITLE PART NO. PAGE...
  • Page 5 The 350HO Deluxe engine assembly includes an oil filter adapter but no oil filter element. The 350HO uses an AC # PF 25 oil filter. A premium oil filter (AC # UPF25) is available for your 350HO engine. This has a 100% wire backed synthetic media with 6 micron filtration.
  • Page 6 13. Do not use synthetic oil for break-in. It would be suitable to use synthetic motor oil after the second recommended oil change and mileage accumulation. In colder regions, a lower viscosity oil may be required for better flow character- istics. 12487544 350HO Deluxe Engine Specifications REV16JL08 TITLE PART NO.
  • Page 7 PERFORMANCE SERVICE PARTS OPERATIONS PARTS 6200 Grand Pointe Drive, Grand Blanc, MI 48439 350HO Deluxe Engine Specifications: Displacement: ........350 cubic inches Bore x Stroke: ........4.00 inch x 3.48 inch Compression .......... 9.1:1 Block: ............ Cast iron, four-bolt intermediate mains Cylinder Head: ........
  • Page 8 Additional parts that may be needed: Flywheel / Flexplate: Like all small block V-8 engines produced since 1986, the 350HO Deluxe engine has a 3.00” diameter flywheel flange bolt pattern. Small block V-8 engines produced from 1958 through 1985 had a 3.58” diameter flywheel flange bolt pattern.
  • Page 9 Fuel Pump: The 350HO Deluxe engine does not include a fuel pump. However, it does have a mechanical fuel pump boss with a block off plate installed. The fuel system must be capable of supplying adequate fuel volume at a minimum of 6 psi pressure when the engine is operating at wide open throttle (WOT).
  • Page 10 12556204 Offset oil filter adapter 14092398 Bolt, oil filter adapter (2 required) AC PF52 Filter to fit adapter, spin-on 88893990 Gasket and seal, oil filter adapter 11610405 Washer, oil filter adapter (2 required) 350HO Deluxe Service Parts List: Part # Quantity Name Part #...
  • Page 11 Le moteur de luxe 350HO nec plus ultra peut être installé dans des véhicules dans lesquels des moteurs V-8 de Chevrolet à bloc compact de 265-400 po étaient utilisés à...
  • Page 12 350HO. Ces renseignements ne sont pas destinés à remplacer les manuels d’atelier complets et les catalogues de pièces en matière de moteurs et de composants de la General Motors. Plutôt, ce guide a été conçu pour offrir des renseignements supplémentaires sur les matières pouvant intéresser les «bricoleurs» et les mécaniciens.
  • Page 13 PARTS 6200 Grand Pointe Drive, Grand Blanc, MI 48439 Couples de serrage du moteur de luxe 350HO : Boulon de retenue / vis de l’arbre à cames ..... 12 Nm / 106 po-lb Boulon de retenue / vis de pignon d’arbre à cames 25 Nm / 18 pi-lb Écrou de bielle ............
  • Page 14 (RGE) ou un étrangleur à air chaud. Pompe à eau : Le moteur de luxe 350HO est muni d’une pompe à eau en fonte de style long, numéro de pièce GM 12529305. Un thermostat de 180 °F est installé dans le système de refroidissement.
  • Page 15 Le moteur de luxe 350HO comprend un adaptateur de filtre à huile, mais aucun élément de filtre à huile. Le moteur 350HO utilise un filtre à huile AC n° PF 25. Un filtre à huile de qualité supérieure (n° AC UPF25) est également disponible pour le moteur 350HO.
  • Page 16 Dans les régions plus froides, l’utilisation d’une huile de viscosité plus faible peut s’avérer nécessaire pour obtenir de meilleures caractéristiques de débit. 12487544 350HO Deluxe Engine Specifications REV16JL08 TITLE PART NO.
  • Page 17 SERVICE PARTS OPERATIONS PARTS 6200 Grand Pointe Drive, Grand Blanc, MI 48439 Caractéristiques techniques du moteur de luxe 350HO : Cylindrée : ..........350 po Alésage x course : ........ 101,6 mm x 88,4 mm (4,00 po x 3,48 po) Compression : ........
  • Page 18 Volant moteur / tôle d’entraînement : Comme tous les moteurs V8 à bloc compact produits depuis 1986, le moteur de luxe 350HO possède une position de boulonnage d’épaulement de volant moteur d’un diamètre de 76,2 mm (3,00 po). Les moteurs V8 à bloc compact produits au cours de la période de 1958 à...
  • Page 19 Web à www.gmperformanceparts.com. Les cache-culbuteurs à bride préalables à 1987 peuvent être installés sur le moteur de luxe 350HO à l’aide de l’adaptateur de numéro de pièce 24502540. Cet adaptateur est usiné à partir d’aluminium à billette et il utilise un joint torique situé entre l’adaptateur et le rail du cache-culbuteurs de la culasse.
  • Page 20 Filtre vissable convenant à l’adaptateur 88893990 Joint d’étanchéité d’adaptateur de filtre à huile 11610405 Rondelle d’adaptateur de filtre à huile (2 requises) Liste de pièces de rechange du moteur de luxe 350HO : arrière de vilebrequin N° de pièce Quantité...
  • Page 21 350HO. Al instalar un motor de lujo 350HO en un vehículo que no está equipado originalmente con un bloque pequeño V8, puede ser necesario adaptarle o fabricar varios componentes para los sistemas de enfriamiento, combustible, eléctrico y de escape.
  • Page 22 Este manual también describe los procedimientos y las modificaciones que podrían ser útiles durante la instalación de un motor de lujo 350HO. No pretende reemplazar los manuales de servicio completo y los catálogos de partes que abarcan los componentes y motores de General Motors. Más bien está diseñado para proporcionar información adicional en las áreas de interés para los entusiastas y mecánicos de “Hágalo usted mismo”.
  • Page 23 SERVICE PARTS OPERATIONS PARTS 6200 Grand Pointe Drive, Grand Blanc, MI 48439 Especificaciones de torque del motor de lujo 350HO: Perno/tornillo del retenedor del árbol de levas ..106 pulg-lb/12 N·m Perno/tornillo de la rueda dentada del árbol de levas ..............18 pies-lb/25 N·m Tuerca de la biela .............
  • Page 24 (EGR) o un obturador de aire caliente. Bomba de agua: El motor de lujo 350HO viene con una bomba de agua de hierro fundido estilo largo, número de parte de GM 12529305. El sistema de enfriamiento tiene instalado un termóstato de 180° F.
  • Page 25 Cárter de aceite/filtro/adaptador/varilla medidora: El motor de lujo 350HO incluye un cárter de aceite, número de parte 12557558, el mismo cárter que el de la producción ZZ4. Éste es un empaque y cárter de aceite con varilla medidora derecha de cuatro cuartos.
  • Page 26 13. No utilice aceite sintético para la interrupción. Después del segundo cambio de aceite recomendado y la acumulación de millas, será adecuado utilizar aceite sintético de motor. En regiones más frías, un aceite con poca viscosidad puede requerir mejores características de flujo. 12487544 350HO Deluxe Engine Specifications REV16JL08 TITLE PART NO.
  • Page 27 PERFORMANCE SERVICE PARTS OPERATIONS PARTS 6200 Grand Pointe Drive, Grand Blanc, MI 48439 Especificaciones del motor de lujo 350HO: Desplazamiento: ........350 pulgadas cúbicas Abertura x carrera: ........ 4.00 pulgadas x 3.48 pulgadas Compresión ........... 9.1:1 Bloque: ..........Hierro fundido, tubería intermedia de cuatro pernos Culata de cilindros: .......
  • Page 28 Motor de arranque: El motor de lujo 350HO no incluye un motor de arranque. El motor de arranque debe coincidir con el diámetro del volante (o volante del motor) al instalar un motor de lujo 350HO. Los volantes de diámetro pequeño tienen 12 3/4”...
  • Page 29 PMGR de 14” (se necesitan 2) Bomba de combustible: El motor de lujo 350HO no incluye una bomba de combustible. Sin embargo, tiene un resalto de la bomba de combustible mecánica con una placa de bloqueo instalada. El sistema de combustible debe tener la capacidad de suministrar el volumen adecuado de combustible a una presión mínima de 6 psi cuando el motor...
  • Page 30 88893990 Empaque y sello, adaptador del filtro de aceite AC PF52 Filtro al adaptador de ajuste, giratorio 11610405 Arandela, adaptador del filtro de aceite (se necesitan 2) Lista de partes de servicio del motor de lujo 350HO: No. de parte Cantidad Nombre No. de parte Cantidad...

Ce manuel est également adapté pour:

12496968