HAMPTON BAY 248-523 Instructions page 5

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea Hood
1 ea Main Fixture
Body (#1)
Coupling (Optional) (#23)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Install up to a 100 watt Light Bulb (#17) or a Listed SBCFL (Self-Ballasted Compact Fluorescent Lamp
[not provided]) in the socket of the Main Fixture Body (#1). Do not exceed a 100 watt incandescent
light bulb, or a 26 watt SBCFL.
3. Attach the Hood (#2) to the Main Fixture Body (#1) using the provided Hood Screws (#18) and Lock
Washers (#19).
4. Thread the Finial (#22) onto the bottom of the Main Fixture Body (#1).
4. OPTIONAL TAIL ASSEMBLY - Thread the Coupling (#23) onto the bottom of the Main Fixture
Body (#1). Thread the Nipple (#20) onto the Coupling (#23). Slide the Tail (#21) and the Fount (#24)
over the Nipple (#20) and secure them in place by threading the Finial (#22) to the bottom of the Nipple
(#20).
Page 4
(#2)
1 ea Nipple
(Optional) (#20)
2 ea Hood
Nuts (#18)
2 ea Lock Washers (#19)
1 ea Tail
(Optional)
(#21)
1 ea Fount
(Optional)
(#24)
1 ea Finial (#22)