Publicité
Les langues disponibles
Les langues disponibles
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by removing the fuse at the fuse box.
2. There are no serviceable parts inside the motion sensor. DO NOT try to repair or
disassemble the unit. Doing so could damage the unit and cause possible electrical shock.
Consult a qualified electrician if needed.
3. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. If you have any non-electrical questions about this fixture, please call our
Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.
reference your SKU (248-523) or UPC (046335904293).
4. KEEP your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
(not included):
Phillips
screwdriver
Light Bulb (100
watt maximum or
CFL equivalent)
Flathead
screwdriver
Safety
goggles
Wire
cutters
Electrical
tape
Please
Wire
strippers
Silicon Rubber
Sealant
for exterior use
Page 3
Publicité
