Publicité
Les langues disponibles
Les langues disponibles
2.2 Stabilizer use for model 5 and 6 steps
3
Untighten the knurled knob.
Unfold the stabilizer until it touches the stopper and tighten the knurled knob.
It's normal that stabilizer don't touch the ground at this step.
2.3 Mise en place des stabilisateurs – modèle 7 Marches
3
1
By pushing on the locking cam (1), unfold the stabilizer until that the mark on tube is visible.
Check the position according to the indicated dimensions. It's normal that stabilizer don't
touch the ground at this step.
2.4 Use along a wall
When using the product by a wall, it is
authorized to not unfold the stabilizer on the
wall side.
61029_500 ind_00
1
3
1
2
2
Check that stabilizers are on
contact with stopper and
stabilizer are locked before use.
3
= =
2194 mm
Check that stabilizers
are blocked and that
mark on tube is just
outcrop the external
tube before use.
01/09/2021
Publicité
