TUBESCA-COMABI VELOCE Notice D'utilisation page 5

Products in compliance to standard NF P 93-353 (models 2 to 6 steps only).
Products in compliance to standard EN 131-7.
Read this instruction before first use.
1. Product description
Individual platforms are to be used for indoor finishing.
Individual platforms must be used by one person only on the working platform.
Those platforms are equipped of two wheels to move the platform in folded position and four retractable
wheels to move platform on open position.
Front foot*
Rear foot*
Rear
Foldable
Stabilizer
Central
Foldable
Stabilizer
* Foots must be assembly before first use (instuction in kit provided)
2. Use
PPE :
2.1. Establishment
1
Hold the product vertically to unfasten the security belt, then,
taking stiles, open platform by discarding ascendable side from
support side. Check that the platform is in contact with the
support side and that platform lock is engaged.
61029_500 ind_00
Stabilisation way according to models
02274 012 02274 013
X
X
Legend :
X
Step number
X Assembly order
02274 014 02274 015
X
X
X
Point if vigilence
02274 016 02274 017
X
X
X
2
Lower the rear brace
01/09/2021