Korg Pa500 Mode D'emploi page 3

KORG Pa500 – Operating System release 1.10
New functions of Pa500 Version 1.10
Pa500 Version 1.10
The following functions are added to Pa500 by upgrading to
Operating System Version 1.10.
Various Modes
Quarter Tone SubScale Keypad support
Quarter Tone SubScale (SC) Presets
Quarter Tone SubScale shortcut
Quarter Tone SubScale assignable functions
Style Play Mode
Local Pad banks
Pad Record Mode
Local Pad banks for saving Pads
Sequencer Mode
Recording Quarter Tone settings or SC Presets into a
Song
Sound Mode
ROM Multisample and Drum Kit banks now called Stan-
dard (STD) banks
Local Multisample banks
Local Drum Kit banks
Fixed Scale
Global Mode
STS SubScale/Quarter Tone Lock
Pedal/Footswitch Calibration
Write SC Preset command added
(a). Only available on some models.
If new, your Pa500 might already include Operating System ver-
sion 1.10. To check, please go to the Media > Utility page, and
read the version number in the lower area of the display.
To load the new Operating System, please read the instructions
supplied with the installation file in our web site
(www.korgpa.com).
Hint: After loading the new OS, you might need to re-calibrate the
TouchView display (Global > Touch Panel Calibration).
See page
(a) 1
1
(*) 2
2
2
2
2
3
3
3
3
3
4
4
KORG Pa500 – Operating System release 1.10
New functions of Pa500 Version 1.10
Various Modes
Quarter Tone SubScale Keypad support
The Middle East versions of Pa500 include a Quarter Tone Sub-
Scale Keypad, including four SubScale (SC) Preset buttons. They
are supported, and have equivalents in the Sub Scale or Scale
pages of the graphical user interface.
SC Presets
in Style Play and Song Play mode
SC Presets
in Global mode
Quarter Tone SubScale (SC) Presets
Four Quarter Tone SubScale (SC) Presets are stored in the Glo-
bal area of the permanent memory. You can select them using
the SC Preset buttons in the control panel or the SC buttons in
the display.
When the instrument is turned on, SC Presets are still turned
off.
SC Presets can be modified and saved to memory. You can mod-
ify them in the Global > General Controls > Scale page. This
page has been revised to include the new features.
1