Riccar R60 Manuel Du Propriétaire page 13

Pre-Motor Filter
1 . Push the dust cup latch to remove the
dust cup from the vacuum (Fig . 1) .
2 . Remove the gray foam filter from the
frame located at the base of the main
body (Fig . 2) .
3 . Shake or tap the filter to remove
excess dust or replace with a new filter
(do not wash or reuse) .
4 . Replace the dust cup onto the vacuum
(Fig . 4) .
High Flow Dust Bin Filter
1 . Push the dust cup latch to remove the
dust cup from the vacuum (Fig . 1) .
2 . Remove the white High Flow filter
by grasping the top of the filter and
pulling straight up (Fig . 3) .
3 . Shake or tap the filter to remove
excess dust or replace with a new filter
(do not wash or reuse) .
4 . Replace the dust cup onto the vacuum
(Fig . 4) .
Pre-Filter
1 . Push the dust cup latch to remove the
dust cup from the vacuum (Fig . 1) .
2 . Remove the cyclonic filter holder
(Fig . 5) .
3 . Remove the white High Flow filter
by grasping the top of the filter and
pulling straight up (Fig . 3) .
4 . Remove the black pre-filter from the
inside of the cyclonic filter holder
(Fig . 6) .
5 . Shake or tap the filter to remove
excess dust or replace with a new filter
(do not wash or reuse) .
6 . Replace the pre-filter and the High
Flow filter in the cyclonic filter holder .
7 . Replace the dust cup onto the vacuum
(Fig . 4) .
WARNING: Do not put filters in the
dishwasher or clothes washing machine .
REPLACING THE FOAM FILTERS
11
Fig . 1
Fig . 3
Fig . 5
Fig . 2
Fig . 4
Fig . 6