Installing / Removing The Battery - Trek Ride+ Manuel Du Propriétaire

„ Installing / removing the battery
How to use the key
The following description may not be applicable as different types of keys are available.
1.
Insert the key into the key cylinder in the battery
holder.
• The position of the key does not affect the insertion of the
battery. You can insert it regardless of the key position.
• You cannot remove the key when it is not in the inserting
position.
2.
To unlock the battery turn the key until you feel some
resistance.
To prevent the battery from dropping off, do not ride the bicycle
with the key inserted.
CAUTION
<BT-E6000>
Key
<BT-E6010>
Key
Key cylinder
<BT-E6000>
<BT-E6010>
EN-13
Key cylinder