Use; Wired Controller; Operating Mode Selector - OEG 650 001 127 Notice De Montage Et D'utilisation

60
4.0

Use

4.1

Wired controller

4.2

Operating mode selector

GB
Operating mode
Water temperature
Clock
Clock and timers
IMPORTANT:
Before starting, make sure that the filtration pump is working and that water is
circulating through the heat pump.
Prior to setting the required temperature, you have to select an operating mode for your
heat pump first:
Automatic Mode (warm, cold)
Select the Automatic
Heating or Cooling automatically (depending on the actual pool
temperature) in order to reach the desired temperature.
Cooling mode
Select the Cooling
in the pool.
Heating mode
Select the Heating
in the pool.
Button: Operating
mode selector
mode for the heat pump to switch to
mode for the heat pump to cool the water
mode for the heat pump to heat the water
Swimming pool heat pump
Outside
temperature
Button:
On/Off