Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
Charging
Switch the shaver to the „OFF" position
before charging. The charging period
begins as soon as you connect the
charging cable to a power source. This
is signalled by the red indicator light
lighting up. The charging interval ends
after 8h. The control light then changes
from red to green. If the charging process
is interrupted, the charging period of 8h
starts again.
•
Charging time 8 hours
•
Battery
life
30-40 min
•
Charging current: 5V - 1A
•
Battery: 400mA Ni-Mh
Changing the shaving heads
Release the shaving head from the handpiece:
Hold the handpiece in one hand and
with the other hand turn the attachment
counter-clockwise until the lock is released
and pull the shaving head upwards.
in
operating
mode
Insert the shaving head:
Place the desired attachment on the
handpiece and turn it clockwise until it
locks into place.
Trimmer attachment
The 2 shaving heads body and bikini
include a trimmer attachment each. Use
this to shorten the hair length instead of
shaving.
Nose hair remover
For hygienic reasons, the nose hair
remover consists of 2 parts, as this enables
thorough cleaning. During transport, it is
possible that the inner connecting piece
may come loose from the shaving head.
This is not a defect. Please put the small
plastic pen back into the white plastic
body before use.
APPLICATION
Your EVAPORE shaving kit contains
5 different attachments to meet all
requirements.
9
Publicité
